CLEANING ROBOTS

S5

AI-Powered Autonomous Sweeper

Automate large-area sweeping with the S5

The CenoBots S5 is a smart, efficient autonomous sweeper for industrial and commercial spaces. Powered by a 100 TOPS NVIDIA AI chip and a 32-beam 3D LiDAR, it detects and cleans debris intelligently, adapts to real-time changes and controls dust with HEPA filtration, from supermarkets to large parking garages and mega warehouses.

Best for

Industrial and commercial sweeping

Primary task

Sweeping dust and industrial debris

Environment

Warehouses, factories, car parks, supermarkets and large facilities

Deployment type

Mapped autonomous deployment, with SPARK site assessment, training and ongoing support

Keep large facilities swept without tying staff to daily floor cleaning

Industrial and commercial sites collect dust, plastic, cardboard and screws across large, busy floors.

Full-coverage sweeping wastes time

Cleaning every square metre on every run is slow when debris is scattered.

Spot cleaning.

The S5 intelligently detects and cleans debris up to 4× faster than traditional full-coverage cleaning.

People and forklifts share the floor

Busy operations make autonomous cleaning hard to run safely.

AI-powered intelligence

A 100 TOPS NVIDIA AI chip and 32-beam 3D LiDAR with up to 150 m detection range avoid people, forklifts and obstacles in real time.

Doorways, aisles and speed bumps block routes

Many sweepers get stuck at thresholds and narrow passages.

Excellent passability

The S5 glides through standard 32″ doorways, narrow aisles and over speed bumps for seamless operation.

Fine dust clogs filters

Clogged filters reduce suction and let dust escape back into the air.

Advanced dust control

A powerful suction motor with HEPA filtration captures fine dust, and an automatic filter shaker prevents clogging.

Key outcomes

High-speed productivity

Clean large areas quickly with industrial-grade performance built for warehouses and factories.

820 mm sweeping width · 50 L debris capacity · ~2,500 m²/h productivity · 5–7 h runtime · 2 h charging.

Handles dust, plastic, cardboard, screws and warehouse waste without slowing down.

Smart AI
Navigation

Operate safely in busy facilities. Advanced LiDAR and AI avoid people, forklifts and obstacles in real time.

100 TOPS NVIDIA AI chip · 32-beam 3D LiDAR · up to 150 m detection range · dynamic environment adaptation.

Keeps cleaning stable and consistent across large-scale industrial facilities.

Scalable Smart Automation

Grow automation across your site. The S5 integrates into smart-facility operations and supports coordinated multi-robot cleaning.

Multi-robot coordination · smart-facility integration · automatic spot cleaning.

Scales from a single robot to a coordinated fleet.

Better dust control

Maintain cleaner, healthier work environments. HEPA filtration and intelligent cleaning keep dust under control.

HEPA filtration · automatic filter shaker · powerful suction motor · 8° gradeability.

Reduces manual labour needs and improves operational efficiency.

What powers the S5's intelligent sweeping

Spot cleaning

The S5 intelligently detects and cleans debris up to 4× faster than traditional full-coverage cleaning.

Powerful productivity

A compact yet highly efficient design performs in spaces of all sizes, from supermarkets to large parking garages and mega warehouses.

AI-powered intelligence

A 100 TOPS NVIDIA AI chip and an industry-leading 32-beam 3D LiDAR deliver up to 150 m (492 ft) detection range.

Dynamic adaptation

Intelligent navigation adapts to real-time changes for stable, consistent operation across large-scale industrial facilities.

Excellent passability

Built for real-world environments, the S5 passes through standard 32″ doorways, narrow aisles and over speed bumps.

Advanced dust control

A powerful suction motor with HEPA filtration captures fine dust, and the automatic filter shaker prevents clogging.

How it works

01.

Map or configure

Prepare the S5 for the site. The facility is mapped with its 3D LiDAR and sweeping routes and schedules are configured.

What the S5 handles
Uses its 32-beam 3D LiDAR and AI chip to map the environment and plan routes.

Where people step in
Initial mapping and configuration require human input.
The exact SPARK deployment process TBC

02.

Run the workflow

Let the S5 sweep autonomously, spot-cleaning debris and avoiding people and forklifts in real time.

What the S5 handles
Carries out sweeping, spot cleaning, dust control and obstacle avoidance.

Where people step in
People empty the 50 L debris bin and step in for situations outside the configured workflow. Exact procedures TBC

03.

Monitor and improve

Keep cleaning aligned as the environment changes, with coordinated multi-robot cleaning on larger sites.

What the S5 handles
Adapts navigation to real-time changes and shakes its filter automatically.

Where people step in
People remain responsible for reviewing performance and deciding when adjustments, maintenance or further configuration are needed. TBC

Use cases and environments

Exhibition Centres

Sweeping of large halls between events.

Stadiums & Arenas

Concourse sweeping with real-time obstacle avoidance.

Resort Service Areas

Back-of-house and loading area sweeping.

Hotel Car Parks

Sweeping of parking garages and ramps.

Supermarkets

Compact sweeping of aisles and back-of-store areas.

Parking Garages

Large-area sweeping over speed bumps.

Warehouse Clubs

Sweeping of wide aisles and large floors.

Retail Distribution

Loading dock and back-of-house sweeping.

Transport Hubs

Sweeping of concourses and service areas.

Public Car Parks

Routine sweeping of multi-storey car parks.

Hospital Service Areas

Dust-controlled sweeping of logistics areas.

Universities

Sports halls and large covered areas.

Mega Warehouses

Long-run sweeping with 50 L debris capacity.

Factories

Removal of dust, plastic, cardboard and screws.

Logistics Centres

Safe sweeping around forklifts and people.

Multi-robot Sites

Coordinated cleaning across very large facilities.

Product in action

S5 cleaning debris from fine dust to larger waste

Technical specifications

Specification

S5

Specification

S5

Specification

S5

Specification

S5

Specification

S5

Specification

S5

Specification

S5

Deployment and integration

From site survey to launch, SPARK prepares your robot for your site, your workflow and your team.

What SPARK adds

We are not a box shifter. Deployment covers site survey, mapping, workflow design, integration planning, training and launch — so your robot arrives configured for your building rather than dropped at your loading bay.

If the survey shows the robot is wrong for your site, we will say so.

upSPARK and ongoing support

From installation and user training to software updates and on-site maintenance, we provide full after-sales support.

Safety, compliance and governance

Safety, compliance and operating information for technical and procurement review.

Compliance

Certification and conformity

Declaration of Conformity and certification documents for this robot are available on request for technical and procurement review.