CLEANING ROBOTS

C30

3-in-1 Commercial Robotic Cleaner

Automate everyday dry cleaning with the C30

The KEENON C30 is a three-in-one commercial cleaning robot offering vacuuming, sweeping and dust mopping. With LiDAR-based navigation, smart auto-charging, a handle for manual operation and task management through the KEENON app, it keeps hotels, offices and public spaces clean quietly and consistently.

Best for

Quiet everyday dry cleaning

Primary task

Sweeping, vacuuming and dust mopping

Environment

Hotels, offices, public spaces and mixed-floor commercial areas

Deployment type

Mapped autonomous deployment, with SPARK site assessment, training and ongoing support

Keep busy spaces clean without noisy machines or manual vacuuming

Hotels, offices and public spaces need daily dry cleaning across carpets and hard floors, often while people are around.

Daily dry cleaning takes staff time

Sweeping, vacuuming and mopping the same areas every day keeps teams busy.

3-in-1 dry cleaning.

The C30 sweeps, vacuums and dust-mops, collecting dust and debris and leaving floors spotless.

Cleaning disrupts guests and staff

Loud machines are hard to use while spaces are occupied.

Quiet operation

The C30 operates at reduced noise levels, ideal for hotels, offices and public spaces without disruption.

Robots stop when the battery runs low

Manual charging interrupts long cleaning sessions.

Smart auto-charging

Customise operating hours to your schedule; with one full charge the C30 cleans up to 2,500 m².

Some areas need a person to guide the machine

Tiles and spot areas sometimes need manual cleaning.

Dual operation modes

A handle allows manual operation when needed, and the detachable mop head applies 0.8 kg downward pressure for efficient dust mopping.

Key outcomes

Strong suction power

Remove dust, dirt and debris efficiently across different surfaces.

Up to 19,000 Pa suction · 61 cm cleaning width · up to 600 m²/h · carpets, hardwood, tiles and stone.

Delivers consistent results across mixed floor types.

Smart
Navigation

Follow efficient cleaning routes instead of random paths. LiDAR-based mapping enables intelligent route planning.

LiDAR mapping · dynamic path adjustment · anti-drop sensors · anti-collision sensors.

Protects furniture and surroundings while covering the whole area.

App & Voice Control

Schedule, monitor and control cleaning tasks easily. Assign and track tasks with the KEENON app.

KEENON app · remote task assignment · real-time updates · voice control.

Gives teams insight into every C30 and its cleaning activity.

Long battery life

Clean for longer between charges. Auto-charging and customisable hours keep the C30 ready.

Up to 6 h sweeping & vacuuming · up to 10 h dust mopping · auto-charging · 5–6 h charging time.

Supports extended cleaning sessions with minimal intervention.

What powers the C30's quiet 3-in-1 cleaning

3-in-1 dry cleaning

Sweeping collects dust and debris, vacuuming provides strong suction for deep cleaning, and mopping leaves floors spotless.

Smart auto-charging

Customise operating hours to suit your schedule; with one full charge the C30 can clean up to 2,500 m².

Dual operation modes

A handle allows manual operation, and the detachable mop head delivers 0.8 kg downward pressure for daily tile mopping.

Smart navigation

LiDAR-based mapping enables intelligent route planning and dynamic path adjustments.

Remote assign and track

Assign and track cleaning tasks and gain insights into your C30 with the KEENON app.

Anti-drop & anti-collision

Drop and collision sensors prevent falls and protect furniture and surroundings.

How it works

01.

Map or configure

Prepare the C30 for the space. The environment is mapped with LiDAR and operating hours and tasks are set in the KEENON app.

What the C30 handles
Uses LiDAR-based mapping to plan intelligent cleaning routes.

Where people step in
Initial mapping and configuration require human input.
The exact SPARK deployment process TBC

02.

Run the workflow

Let the C30 clean autonomously and quietly, sweeping, vacuuming or dust-mopping and adjusting its path dynamically.

What the C30 handles
Carries out 3-in-1 dry cleaning, obstacle and drop avoidance, and auto-charging.

Where people step in
People can switch to manual mode with the handle for spot cleaning. Exact exception and takeover procedures TBC

03.

Monitor and improve

Keep cleaning aligned with your site using the KEENON app to assign and track tasks.

What the C30 handles
Reports task progress and status in real time.

Where people step in
People remain responsible for reviewing performance and deciding when adjustments, maintenance or further configuration are needed. TBC

Use cases and environments

Hotels & Resorts

Quiet cleaning of lobbies and corridors, as at Maldron Hotel Newcastle.

Restaurants & Cafés

Daily sweeping and vacuuming of dining areas.

Serviced Apartments

Cleaning of shared corridors and lounges.

Leisure Venues

Low-noise floor care while guests are present.

Offices & Workplaces

Daily vacuuming of carpets and hard floors.

Retail Stores

Dust control on shop floors.

Showrooms

Gentle dust mopping of polished floors.

Co-working Spaces

Scheduled cleaning of shared areas.

Libraries & Museums

Quiet cleaning around visitors.

Schools & Universities

Cleaning of corridors and classrooms.

Healthcare & Clinics

Dry cleaning of waiting areas and corridors.

Government Facilities

Routine floor care for public buildings.

Warehouse Offices

Cleaning of offices and welfare areas.

Light Manufacturing

Dust control in clean production areas.

Distribution Centres

Reception and admin area cleaning.

Staff Canteens

Sweeping and dust mopping of break areas.

Product in action

C30 powerful 3-in-1 cleaning

C30 automatic recharging

C30 dynamic route adjustment

Technical specifications

Specification

C30

Specification

C30

Specification

C30

Specification

C30

Specification

C30

Specification

C30

Specification

C30

Deployment and integration

From site survey to launch, SPARK prepares your robot for your site, your workflow and your team.

What SPARK adds

We are not a box shifter. Deployment covers site survey, mapping, workflow design, integration planning, training and launch — so your robot arrives configured for your building rather than dropped at your loading bay.

If the survey shows the robot is wrong for your site, we will say so.

upSPARK and ongoing support

From installation and user training to software updates and on-site maintenance, we provide full after-sales support.

Safety, compliance and governance

Safety, compliance and operating information for technical and procurement review.

Compliance

Certification and conformity

Declaration of Conformity and certification documents for this robot are available on request for technical and procurement review.