CLEANING ROBOTS

CC1 Pro

AI-Powered Autonomous Cleaning Robot

Automate large-area cleaning with the CC1 Pro

The PUDU CC1 Pro brings together AI vision, autonomous navigation, self-monitoring cleaning hardware and data-rich reporting to deliver scalable autonomous cleaning for large commercial spaces. It detects and scrubs common wet stains, checks its own results with a rear AI camera, and handles water and charging at its workstation.

Best for

AI-driven cleaning of large commercial floors

Primary task

Spot scrubbing, sweeping and vacuuming

Environment

Malls, hotels, hospitals, airports, office buildings and supermarkets

Deployment type

Mapped autonomous deployment, with SPARK site assessment, training and ongoing support

Keep large commercial floors clean without checking every area by hand

Busy venues produce spills and stains throughout the day, across hard floors and carpets that each need a different clean.

Spills and stains appear between scheduled cleans

Coffee spills, sauces and puddles can sit on the floor until someone notices and responds.

AI spot scrubbing.

AI vision recognition with dynamic path planning detects common wet stains, so the CC1 Pro responds faster with more efficient coverage.

It can be hard to know how well an area was cleaned

Supervisors may need to walk the floor to confirm whether stains were fully removed.

Real-time performance detection

The rear AI camera monitors cleaning results, triggers spot re-cleaning for leftover stains and generates heatmaps after each task.

Refilling, draining and charging interrupt the cleaning process

Each manual stop adds another step before the robot can continue working.

Workstation automation

The workstation handles water refill and drainage automatically, and the CC1 Pro returns to its dock to charge for extended run time.

Different floors need a different clean

Carpets, hard floors and heavily soiled areas cannot all be cleaned the same way.

AI cleaning intensity control

The CC1 Pro adjusts scrubbing intensity to dirt levels and switches modes by floor type: vacuuming on carpets and sweep-and-vacuum on hard floors.

Key outcomes

AI-driven cleaning

Respond to spills and stains as they happen. The CC1 Pro recognises common wet stains and adjusts its cleaning intensity to the dirt it finds.

AI stain detection · dynamic path planning · intensity control · floor-type mode switching · 1,500–3,000 m²/h AI spot cleaning rate.

Keeps high-traffic floors presentable between scheduled cleans with faster response times.

Omni-Sense
Safety

Clean safely around people and changing layouts. An AI-driven perception system constantly detects static and moving obstacles.

VSLAM+ positioning · multiple sensors · static and moving obstacle detection · automatic rerouting.

Its recognition model keeps expanding the obstacle types it understands, adapting to diverse environments.

Data Insights

See exactly how cleaning is performing. Visual reports cover waste hotspots, cleaning coverage, stain persistence, task success and maintenance frequency.

Heatmaps after each task · fleet management · Pudu Link app · remote monitoring.

Enables data-driven scheduling and clearer reporting for supervisors.

Less routine servicing between cleaning tasks

Automate more of the routine work that keeps the robot ready to clean. The CC1 Pro refills, drains and charges at its workstation.

Auto water refill · auto drainage · auto charging · AI component self-monitoring.

Reduces manual servicing steps and keeps longer cleaning workflows moving with less operator intervention.

What powers the CC1 Pro's AI-driven cleaning

AI spot scrubbing

Combining AI vision recognition with dynamic path planning, the CC1 Pro detects common wet stains such as coffee spills, sauces and puddles, with a cleaning rate of 1,500–3,000 m²/h.

Real-time performance detection

The rear AI camera monitors cleaning performance in real time, detects leftover stains, triggers spot re-cleaning and generates heatmaps after each task.

Smart navigation

VSLAM+ positioning and multiple sensors let the CC1 Pro navigate intelligently, avoid obstacles automatically and reroute when necessary.

Omni-Sense safety

An AI-driven perception system constantly detects static and moving obstacles for safe operation and full cleaning coverage.

Component self-monitoring

The rear AI system monitors cleaning components, detects maintenance issues that could cause secondary contamination and triggers marking, touch-up cleaning or self-cleaning.

IoT compatibility

Manage the CC1 Pro with the Pudu Link app, with E-gate and elevator control options for moving between areas and floors.

How it works

01.

Map or configure

Prepare the CC1 Pro for the space and cleaning task. The working environment is mapped and cleaning zones, modes and schedules are configured.

What the CC1 Pro handles
Uses VSLAM+ positioning and its sensors to understand the environment and support autonomous operation.

Where people step in
Initial mapping and configuration require human input.
The exact SPARK deployment process TBC

02.

Run the workflow

Let the CC1 Pro carry out the cleaning task autonomously. It detects stains, adjusts intensity by floor type and refills, drains and charges at its workstation.

What the CC1 Pro handles
Carries out autonomous cleaning, AI spot scrubbing, obstacle avoidance and automatic charging.

Where people step in
People step in for situations outside the configured workflow or where manual attention is required. Exact exception and takeover procedures TBC

03.

Monitor and improve

Keep the cleaning workflow aligned with your site. Heatmaps and visual reports show coverage, stain persistence and task success.

What the CC1 Pro handles
Generates heatmaps and reports, and monitors its own cleaning components.

Where people step in
People remain responsible for reviewing performance and deciding when adjustments, maintenance or further configuration are needed. TBC

Use cases and environments

Hotels & Resorts

Autonomous cleaning of lobbies, corridors and public areas, with AI spot scrubbing for spills.

Restaurants & Food Courts

Fast response to sauces, drinks and food spills across busy dining floors.

Serviced Apartments

Daily cleaning of shared entrances, hallways and amenity spaces.

Leisure & Entertainment

Reliable floor care for busy venues, with obstacle detection around guests.

Shopping Malls

Large-area cleaning of concourses and walkways, with AI stain detection between scheduled cleans.

Supermarkets & Retail

Spot scrubbing in aisles where spills happen, with mode switching by floor type.

Office Buildings

Scheduled cleaning of receptions, corridors and carpeted office floors.

Showrooms

Keeps polished showroom floors spotless with AI-checked results.

Airports & Transport Hubs

High-coverage cleaning of terminals, with E-gate control for moving between zones.

Healthcare & Hospitals

Consistent cleaning of public areas, with heatmaps and reports for hygiene records.

Schools & Universities

Autonomous cleaning of corridors, halls and communal areas.

Government Facilities

Routine floor cleaning for public buildings, managed through the Pudu Link app.

Light Manufacturing

Regular cleaning of clean production and assembly areas.

Warehouse Offices

Autonomous cleaning of offices, welfare areas and walkways within logistics sites.

Distribution Centres

Keeps reception, break and admin areas clean while staff focus on operations.

Multi-floor Sites

Elevator control lets the CC1 Pro move between floors of larger facilities.

Product in action

CC1 Pro AI-powered cleaning in action

Technical specifications

Specification

CC1 Pro

Specification

CC1 Pro

Specification

CC1 Pro

Specification

CC1 Pro

Specification

CC1 Pro

Specification

CC1 Pro

Specification

CC1 Pro

Deployment and integration

From site survey to launch, SPARK prepares your robot for your site, your workflow and your team.

What SPARK adds

We are not a box shifter. Deployment covers site survey, mapping, workflow design, integration planning, training and launch — so your robot arrives configured for your building rather than dropped at your loading bay.

If the survey shows the robot is wrong for your site, we will say so.

upSPARK and ongoing support

From installation and user training to software updates and on-site maintenance, we provide full after-sales support.

Safety, compliance and governance

Safety, compliance and operating information for technical and procurement review.

Compliance

Certification and conformity

Declaration of Conformity and certification documents for this robot are available on request for technical and procurement review.