- Best for hotels, offices, retail, healthcare and transport hubs
- Sweeps, vacuums, scrubs and mops in a single pass
- Autonomous operation with automatic water fill and drainage
Automate everyday floor cleaning with the CC1
The PUDU CC1 is an intelligent commercial cleaning robot that handles sweeping, vacuuming, scrubbing and mopping. It follows programmed cleaning paths for maximum coverage, so no spot is missed, while teams set tasks and review cleaning reports through the app. Its exclusive workstation fills clean water and drains waste water automatically.
Best for
Everyday 4-in-1 floor cleaning
Primary task
Sweeping, vacuuming, scrubbing and mopping
Environment
Hotels, offices, retail, hospitals, airports and other commercial spaces
Deployment type
Mapped autonomous deployment, with SPARK site assessment, training and ongoing support
Keep commercial floors clean without tying people to every repeatable task
Busy commercial spaces need sweeping, vacuuming, scrubbing and mopping every day, often across several floor types.
Daily floor cleaning takes up valuable staff time
Sweeping, vacuuming, scrubbing and mopping the same areas every day keeps staff busy with repetitive work.
4-in-1 autonomous cleaning.
The CC1 sweeps, vacuums, scrubs and mops in one run, following programmed cleaning paths across mapped areas.
It can be hard to know what has been cleaned without checking manually
Supervisors may need to walk the floor or follow up with staff to confirm which areas have been cleaned.
Digital cleaning reports
The CC1 records the working status of each unit and automatically generates cleaning reports, with real-time notifications on cleaning performance.
Refilling and draining water interrupts the cleaning process
Each manual stop to fill clean water or empty waste water adds another step before the robot can continue working.
Automatic water addition and drainage
With its 15 L clean water tank, 17 L waste water tank and exclusive workstation, the CC1 fills and drains water automatically, with no manual intervention.
Corners and stubborn debris often need extra attention
Open floor areas may be easy to clean, while corners, edges and tougher dirt can require more focused effort.
Edge cleaning and super suction
The side brush cleans neatly into corners and along edges, while up to 17,000 Pa of suction power lifts tough dirt and debris.
Key outcomes
4-in-1 versatile cleaning
Replace several single-purpose cleaning steps with one robot. The CC1 sweeps, vacuums, scrubs and mops in one pass for consistent results.
Sweeping · vacuuming · scrubbing · mopping · 500 mm sweep width · up to 17,000 Pa suction.
Delivers thorough daily cleaning across hard floors and soft carpets without switching machines.
Smart Autonomous
Navigation
Let the CC1 handle cleaning routes with less hands-on guidance. The PUDU SLAM positioning system supports both visual SLAM and laser SLAM for efficient work in complex spaces.
Visual SLAM · laser SLAM · LiDAR · multiple sensors · automatic obstacle avoidance and rerouting.
Reduces the need for operators to guide the machine and helps the robot keep working when routes are blocked.
Easier Cleaning Oversight
Set cleaning schedules and check cleaning activity without being beside the robot. Tasks can be managed through the app or control panel, with remote monitoring through the cloud.
App and control panel scheduling · cloud and mobile monitoring · real-time notifications · automatic cleaning reports.
Gives supervisors clear visibility of cleaning activity across each unit.
Less routine servicing between cleaning tasks
Automate more of the routine work that keeps the robot ready to clean. The CC1 charges itself and handles water at its workstation.
Auto charging · breakpoint resume · automatic clean-water filling · automatic waste-water drainage.
Reduces manual servicing steps and keeps longer cleaning workflows moving with less operator intervention.
What powers the CC1's intelligent everyday cleaning
4-in-1 cleaning performance
Long run time
Smart navigation
Safe around people
Breakpoint resume
Easy to maintain
How it works
01.
Map or configure
Prepare the CC1 for the space and cleaning task. The working environment is mapped and cleaning paths, zones and schedules are configured.
What the CC1 handles
Uses PUDU SLAM positioning and its sensors to understand the environment and support autonomous operation.
Where people step in
Initial mapping and configuration require human input.
The exact SPARK deployment process TBC
02.
Run the workflow
Let the CC1 carry out the cleaning task autonomously. It follows the programmed path, sweeping, vacuuming, scrubbing and mopping as it goes, and refills and drains water at its workstation.
What the CC1 handles
Carries out autonomous floor cleaning, obstacle avoidance, auto charging and breakpoint resume.
Where people step in
People step in for situations outside the configured workflow or where manual attention is required. Exact exception and takeover procedures TBC
03.
Monitor and improve
Keep the cleaning workflow aligned with your site. Real-time notifications and automatic cleaning reports show how each unit is performing.
What the CC1 handles
Collects and summarises the working status of each unit and generates cleaning reports.
Where people step in
People remain responsible for reviewing performance and deciding when adjustments, maintenance or further configuration are needed. TBC
Use cases and environments
Hotels & Resorts
Autonomous sweeping, vacuuming and mopping for lobbies, corridors and public areas, keeping guest spaces consistently clean.
Restaurants & Cafés
Routine floor cleaning across dining and front-of-house areas, with scrubbing for spills and stubborn marks.
Serviced Apartments
Daily cleaning of shared entrances, hallways and amenity spaces without adding to staff workload.
Leisure & Entertainment
Reliable floor care for busy venues, with automatic obstacle avoidance around guests.
Offices & Workplaces
Scheduled 4-in-1 cleaning across open-plan offices, receptions and meeting areas, on hard floors and carpets.
Retail & Shopping Centres
Autonomous cleaning of shop floors and malls, with obstacle avoidance and rerouting around shoppers.
Showrooms
Keeps polished showroom floors spotless with sweeping, scrubbing and mopping in one run.
Co-working Spaces
Cleans shared work areas on a schedule, with cleaning reports to show what has been done.
Schools & Universities
Autonomous cleaning across corridors, halls and communal areas in education environments.
Healthcare & Hospitals
Consistent floor cleaning across hospital and clinic public areas, with digital cleaning records.
Airports & Transport Hubs
Large-coverage cleaning of terminals and stations, navigating busy spaces with visual and laser SLAM.
Government Facilities
Routine floor cleaning for public buildings, with scheduling and remote monitoring through the app.
Light Manufacturing
Daily sweeping, vacuuming and scrubbing for clean production and assembly areas.
Warehouse Offices
Autonomous cleaning of offices, welfare areas and walkways within logistics sites.
Distribution Centres
Keeps reception, break and admin areas clean while staff focus on operations.
Factory Canteens
Scrubbing and mopping for canteens and break rooms, with automatic water handling.
Product in action
Technical specifications
Specification
- Cleaning modes
- Suction power
- Sweep width
- Cruise speed
- Operation noise
- Max. cleaning productivity
- Edge cleaning
- Floor types
CC1
- Sweeping, vacuuming, scrubbing & mopping
- Up to 17,000 Pa
- 500 mm | 19.7 in
- Up to 1.2 m/s | 2.7 mph
- < 70 dB
- TBC
- Side brush for corners and edges
- Hard floors and soft carpets
Specification
- Machine dimensions
- Machine weight
- Clean water tank
- Waste water tank
- Sweep width
- Min. passable width
- Dust box capacity
- Workstation dimensions
CC1
- 663 × 568 × 682 mm
- 60–75 kg | 132–165 lbs
- 15 L | 4 gal
- 17 L | 4.5 gal
- 500 mm | 19.7 in
- TBC
- TBC
- TBC
Specification
- Positioning system
- SLAM modes
- Sensors
- Obstacle handling
- Path planning
- Edge cleaning
- Emergency stop
- Safety certification
CC1
- PUDU SLAM
- Visual SLAM and laser SLAM
- LiDAR and multiple sensors
- Automatic avoidance and rerouting
- Programmed-shape cleaning paths
- Side brush for corners and edges
- Top-mounted emergency stop button
- TBC
Specification
- Max. run time
- Charging time
- Auto charging
- Breakpoint resume
- Charging method
- Battery capacity
- Battery type
- Rated voltage
CC1
- ~ 9 hours
- 3 to 4 hours
- Returns to dock when power is low
- Resumes unfinished task after charging
- Charging station / workstation
- TBC
- TBC
- TBC
Specification
- Task management
- Remote monitoring
- Cleaning reports
- Notifications
- Fleet overview
- Software updates
- Network
- Third-party integrations
CC1
- App or control panel
- Cloud and mobile interface
- Generated automatically
- Real-time cleaning performance alerts
- Working status of each unit summarised
- TBC
- TBC
- TBC
Specification
- Floor types
- Environment
- Operation noise
- Ingress protection
- Operating temperature
- Max. slope
- Max. threshold height
- Min. passage width
CC1
- Hard floors and soft carpets
- Indoor commercial spaces
- < 70 dB
- TBC
- TBC
- TBC
- TBC
- TBC
Specification
- Workstation
- Charging dock
- Side brush
- Roller brush
- Filters
- Detergent
- Spare parts kit
- App / cloud access
CC1
- Automatic clean-water filling and waste-water drainage
- Automatic charging
- Edge and corner cleaning
- Scrubbing and sweeping
- TBC
- TBC
- TBC
- TBC
Deployment and integration
From site survey to launch, SPARK prepares your robot for your site, your workflow and your team.
01 — Site survey
We assess your requirements and site conditions to help plan your robot deployment.
02 — Mapping
The operating area is mapped for autonomous operation before handover.
03 — Workflow design
We develop a deployment plan around your site and operational requirements.
04 — Integration
Integration requirements are assessed for each deployment, while tasks, schedules and reports are managed through the app.
05 — Training
SPARK provides user training as part of its after-sales support.
06 — Launch
Launch follows completion of site preparation, mapping, workflow setup and training.
Site Assessment
Understand the facility, floor types, traffic patterns and operational requirements.
Robot Deployment
Introduce the robot into daily operations with minimal disruption.
Mapping
Configure operating areas and routes according to the environment.
Remote Monitoring
Monitor robot operations and receive performance information through the app.
Training & Handover
Provide operators with the knowledge needed to manage the robot day to day.
Ongoing Optimization
Adapt maps and update software as the facility evolves.
Training & Handover
Provide operators with the knowledge needed to manage the robot day to day.
Remote Monitoring
Monitor robot operations and receive performance information through the app.
Ongoing Optimization
Adapt maps and update software as the facility evolves.
Site Assessment
Understand the facility, floor types, traffic patterns and operational requirements.
Mapping
Configure operating areas and routes according to the environment.
Robot Deployment
Introduce the robot into daily operations with minimal disruption.
What SPARK adds
We are not a box shifter. Deployment covers site survey, mapping, workflow design, integration planning, training and launch — so your robot arrives configured for your building rather than dropped at your loading bay.
If the survey shows the robot is wrong for your site, we will say so.
upSPARK and ongoing support
From installation and user training to software updates and on-site maintenance, we provide full after-sales support.
Technology That Keeps Improving
Every SPARK robot is managed through its manufacturer app and cloud platform, where operators can schedule tasks, monitor each robot remotely and review performance reports. SPARK supports you from installation and training through to software updates and maintenance.
maintenance tasks
Routine maintenance is kept simple, with clear schedules for brushes, filters, tanks and other consumables. SPARK guides your team through each task so the robot stays ready to work.
scheduling
Tasks and schedules can be set and adjusted through the app or control panel, so the robot works at the times that suit your site, including out of hours.
guided maintenance
SPARK provides step-by-step guidance for maintenance tasks, helping your team keep the robot running reliably with minimal downtime.
expert support
Our UK-based team provides expert after-sales support, including troubleshooting, on-site maintenance and help with optimising your robot routines.
Safety, compliance and governance
Compliance
Certification and conformity
Declaration of Conformity and certification documents for this robot are available on request for technical and procurement review.
Obstacle handling and safety
360° Environmental Awareness
SPARK robots use onboard sensors to detect obstacles, slow down or stop, and reroute where required. Detailed safety behaviour is covered in the product documentation.
Operating boundaries
Mapped operating areas
The robot operates within the mapped areas and configured routes set up during deployment. Operating conditions are listed in the technical specifications above.
Data and privacy
App and cloud management
Tasks, schedules and reports are managed through the manufacturer app and cloud platform. Details of data handling and privacy are shared as part of deployment planning.
Documents for review
Documentation pack
The user manual, specification sheet and conformity documentation can be shared for technical and procurement review.
Choosing between Spark cleaning robots
CC1
CC1 Pro
Phantas
Frequently asked questions
Questions about using the CC1 at your site
What type of facilities can the CC1 clean?
The CC1 is designed for hotels, shopping centres, offices, hospitals, airports, schools and other commercial environments, on both hard floors and soft carpets.
How long can the CC1 operate?
The CC1 can run for up to around 9 hours on a full charge, and takes 3 to 4 hours to recharge.
Can the CC1 work without constant operator control?
Yes. Once mapped and configured, the CC1 follows its programmed cleaning paths autonomously, and fills and drains water automatically at its workstation.
How does the CC1 navigate?
The CC1 uses the PUDU SLAM positioning system, supporting both visual SLAM and laser SLAM, together with LiDAR and multiple sensors to avoid obstacles and reroute when needed.
Can the CC1 automatically charge?
Yes. The CC1 returns to its charging station when power is low and, thanks to breakpoint resume, continues its unfinished task once fully charged.
What cleaning tasks can the CC1 do?
The CC1 is a 4-in-1 robot: it sweeps, vacuums, scrubs and mops, with up to 17,000 Pa suction power and side-brush edge cleaning.
How do I request engineering support if there is a problem?
Contact the SPARK support team. We provide after-sales support including troubleshooting, software updates and on-site maintenance for your CC1.