CLEANING ROBOTS

L3

Compact Autonomous Scrubber

Automate everyday scrubbing in tight spaces with the L3

The CenoBots L3 is a compact, intelligent floor-cleaning robot designed for fully autonomous cleaning in tight and busy indoor spaces. With powerful scrubbing performance, smart 3D LiDAR navigation and easy app or voice-command control, the L3 delivers consistent, high-quality cleaning with minimal supervision.

Best for

Scrubbing in tight, busy spaces

Primary task

Floor scrubbing and drying in one pass

Environment

Hospitals, retail aisles, grocery stores, offices and other crowded indoor spaces

Deployment type

Mapped autonomous deployment, with SPARK site assessment, training and ongoing support

Keep busy indoor floors scrubbed without tying staff to every route

Crowded corridors and aisles need regular scrubbing, but large machines struggle to fit and manual cleaning takes valuable staff time.

Large scrubbers cannot fit tight aisles

Narrow corridors and shop aisles are hard to reach with full-size cleaning machines.

Compact yet productive.

With a pass-through width of only 700 mm, the L3 manoeuvres easily in tight spaces while cleaning edges and corners.

Robots can be hard for frontline staff to operate

Complex screens and menus make operators hesitant to start or change cleaning tasks.

Voice-command operation

Simple voice commands operate the L3 without touching the screen, making day-to-day use more comfortable and accessible.

Sites without plumbing interrupt long cleaning runs

Refilling and emptying tanks by hand adds stops and limits how long the robot can clean.

Water tank & workstation support

An optional mobile water tank and workstation, with a 60 L fresh and 50 L dirty tank, supports long cleaning sessions even without built-in water supply.

Maintenance adds downtime

Changing brushes and emptying tanks can take machines out of service for longer than needed.

Easy maintenance

Magnetic brushes, a quick-release squeegee and an easy-access recovery tank simplify maintenance and reduce downtime.

Key outcomes

Strong cleaning performance

Scrub and dry in a single pass. Dual brushes with ~18 kg brush pressure deliver effective scrubbing on busy floors.

25 L solution tank · 25 L recovery tank · 400 mm cleaning width · 18 kg brush pressure · up to 2,016 m²/h theoretical productivity.

Cleans dramatically faster than manual scrubbing while keeping a compact footprint.

AI-Powered
Navigation

Let the L3 handle routes with less hands-on guidance. An NVIDIA AI chip with 100 TOPS and a 96-beam 3D LiDAR power fast, stable obstacle avoidance and path planning.

96-beam 3D LiDAR · NVIDIA AI chip with 100 TOPS · real-time mapping · obstacle avoidance · path planning.

Keeps cleaning reliably in crowded environments with people and changing obstacles.

Smart Digital Control

Manage cleaning without always being beside the robot. The L3 companion app lets teams manage operations remotely and receive alerts when tasks are complete.

Companion app · remote management · task-complete alerts · voice commands · OTA software updates.

Gives supervisors easier visibility over cleaning activity.

Autonomous & reliable operation

Keep the robot ready to clean with less manual servicing. Long battery life, auto-charging and workstation integration support round-the-clock operation.

Auto-charging · workstation integration · optional mobile water tank · smart water regulation · low energy consumption.

Supports 24/7 cleaning schedules while optimising water and energy costs.

What powers the L3's compact autonomous scrubbing

Compact yet productive

A 700 mm pass-through width and compact design let the L3 clean edges and corners in crowded places such as hospital corridors, shopping aisles and grocery stores.

Strong cleaning performance

Dual brushes with ~18 kg brush pressure and a 400 mm cleaning width scrub and dry in a single pass, at up to 2,016 m² per hour.

AI-powered navigation

NVIDIA’s AI chip with 100 TOPS of processing power and a 96-beam 3D LiDAR deliver fast, stable obstacle avoidance and path planning.

Voice-command operation

Simple voice commands operate the robot without touching the screen or complex interfaces, reducing hesitation for operators.

Easy maintenance

Magnetic brushes, a quick-release squeegee and an easy-access recovery tank help reduce downtime and maintenance effort.

Water & energy efficiency

Optional smart water regulation based on floor condition and low energy consumption help optimise operating costs.

How it works

01.

Map or configure

Prepare the L3 for the space and cleaning task. The working environment is mapped and the robot is configured for autonomous cleaning.

What the L3 handles
Uses its 96-beam 3D LiDAR and AI processor for real-time mapping and to support autonomous operation.

Where people step in
Initial mapping and configuration require human input.
The exact SPARK deployment process TBC

02.

Run the workflow

Let the L3 carry out the cleaning task autonomously. It scrubs and dries in a single pass, avoiding obstacles in busy spaces, and can be started by voice command.

What the L3 handles
Carries out autonomous scrubbing, obstacle avoidance, path planning and auto-charging.

Where people step in
People step in for situations outside the configured workflow or where manual attention is required. Exact exception and takeover procedures TBC

03.

Monitor and improve

Keep the cleaning workflow aligned with your site. The companion app sends alerts when tasks are complete, while OTA updates keep the software current.

What the L3 handles
Sends task alerts and receives OTA software updates.

Where people step in
People remain responsible for reviewing performance and deciding when adjustments, maintenance or further configuration are needed. TBC

Use cases and environments

Hotels & Resorts

Autonomous scrubbing of lobbies, corridors and back-of-house areas.

Restaurants & Food Courts

Scrub-and-dry cleaning of busy dining and service areas.

Leisure & Entertainment

Reliable floor care for venues with heavy foot traffic.

Conference Centres

Cleaning of foyers and halls between events.

Grocery Stores

Compact scrubbing between shelves in narrow supermarket aisles.

Shopping Centres

Autonomous cleaning of shop floors and walkways around shoppers.

Office Buildings

Scheduled scrubbing of receptions, corridors and kitchens.

Showrooms

Keeps hard-floor showrooms clean and presentable.

Healthcare & Hospitals

Compact scrubbing of hospital corridors and waiting areas.

Schools & Universities

Autonomous cleaning of corridors, halls and canteens.

Airports & Transport Hubs

Scrubbing of concourses and walkways in busy terminals.

Government Facilities

Routine floor scrubbing for public buildings.

Light Manufacturing

Scrubbing of clean production and assembly floors.

Warehouse Offices

Cleaning of offices, welfare areas and walkways within logistics sites.

Distribution Centres

Keeps reception, break and admin areas clean.

Sites without Plumbing

Mobile water tank and workstation support long runs without fixed water supply.

Product in action

L3 compact autonomous scrubbing

L3 cleaning a busy supermarket aisle

L3 working around people

Technical specifications

Specification

L3

Specification

L3

Specification

L3

Specification

L3

Specification

L3

Specification

L3

Specification

L3

Deployment and integration

From site survey to launch, SPARK prepares your robot for your site, your workflow and your team.

What SPARK adds

We are not a box shifter. Deployment covers site survey, mapping, workflow design, integration planning, training and launch — so your robot arrives configured for your building rather than dropped at your loading bay.

If the survey shows the robot is wrong for your site, we will say so.

upSPARK and ongoing support

From installation and user training to software updates and on-site maintenance, we provide full after-sales support.

Safety, compliance and governance

Safety, compliance and operating information for technical and procurement review.

Compliance

Certification and conformity

Declaration of Conformity and certification documents for this robot are available on request for technical and procurement review.