- Best for warehouses, factories and distribution centres
- Lifts up to 2,000 kg with 20-second fork insertion
- Plug-and-play: no reflectors, QR codes or site changes
Automate pallet handling with the MP2000
The PUDU MP2000 is an AI-native autonomous forklift for pallet handling. Multi-sensor navigation and edge intelligence let it deploy without site modifications, recognise pallets and storage locations, and move up to 2,000 kg with fast fork insertion, while switching to manual mode whenever an operator needs it.
Best for
Autonomous pallet handling
Primary task
Pallet pick-up, transport and drop-off
Environment
Warehouses, manufacturing plants and distribution centres
Deployment type
Plug-and-play deployment, with SPARK site assessment, training and ongoing support
Move pallets around the clock without a dedicated driver for every forklift
Pallet handling depends on skilled drivers, careful alignment and site infrastructure that slows automation down.
Automation projects need site changes
Reflectors, QR codes and platform integration delay deployment.
Plug-and-play, rapid deployment.
Multi-sensor navigation and edge intelligence need no site modifications or complex integration; fast mapping shortens deployment to minutes.
Pallets are rarely placed perfectly
Offset or angled pallets stop autonomous forklifts and need manual help.
Adaptive alignment
MP2000 adapts to manually placed pallets offset by up to 15 cm and angled by up to 15° for precise fork engagement.
Non-standard load carriers confuse robots
Mixed pallet types are hard for fixed-rule systems.
AI load-carrier recognition
Supports three-runner and perimeter-base pallets and learns to recognise non-standard load carriers for stable transport.
Narrow aisles waste storage space
Wide forklift aisles reduce how much a warehouse can hold.
More storage in narrow aisles
Handles 90° pallet pickup in aisles as narrow as 2 m with pallet spacing down to 15 cm.
Key outcomes
Fast pallet handling
Reduce cycle times and accelerate material flow.
2,000 kg max load · 20 s fork insertion · up to 1.6 m/s unloaded, 1.2 m/s loaded · 200 mm max lift height.
Higher throughput with fewer manual moves.
AI-Native
Autonomy
Operate in dynamic warehouses without manual checks.
Storage occupancy detection · load-carrier recognition · clearance assessment · 3D LiDAR-SLAM + VSLAM.
Reduces manual checks, site modifications and commissioning.
Omni-Sense safety
Work safely in mixed traffic with people and equipment.
Depth cameras · 3D LiDAR · 360° perception · dynamic stop and avoid · static obstacle rerouting.
Identifies risks, avoids hazards and issues clear warnings.
Intelligent fleet orchestration
Coordinate many forklifts without a single point of failure.
Distributed decision-making · inter-robot communication · offline sync · PUDU Link, APIs, voice and task buttons.
Keeps the fleet operating in sync even offline.
What powers the MP2000's autonomous pallet handling
Plug-and-play deployment
AI storage detection
Intelligent clearance assessment
20 s fork insertion
Omni-Sense safety
Dual-mode operation
How it works
01.
Map or configure
Prepare MP2000 for your site. It maps the operating environment itself, and storage locations and workflows are set up in minutes.
What the MP2000 handles
Uses 3D LiDAR-SLAM and VSLAM with no reflectors or QR codes.
Where people step in
Initial workflow set-up requires human input.
The exact SPARK deployment process TBC
02.
Run the workflow
MP2000 detects target pallets and storage locations, aligns its forks, lifts and transports loads and places them autonomously.
What the MP2000 handles
Carries out pallet recognition, fork insertion, transport, clearance checks and obstacle avoidance.
Where people step in
Operators can switch to manual mode when needed. Exact exception and takeover procedures TBC
03.
Monitor and improve
Dispatch tasks via PUDU Link, APIs, voice commands or task buttons, with optional elevator and automatic door integration.
What the MP2000 handles
Coordinates with other robots through distributed fleet orchestration.
Where people step in
People remain responsible for reviewing performance and deciding when adjustments, maintenance or further configuration are needed. TBC
Use cases and environments
Product in action
Technical specifications
Specification
- Max. load
- Fork insertion
- Speed
- Max. lift height
- Lowered fork height
- Pallet alignment
- Right-angle stacking aisle
- Pallet spacing
MP2000
- 2,000 kg
- 20 s
- Up to 1.6 m/s unloaded, 1.2 m/s loaded
- 200 ± 5 mm
- 80 ± 5 mm
- Offset up to 15 cm, angle up to 15°
- ≤ 2,000 mm (1200 × 1000 pallet)
- Down to 15 cm
Specification
- Overall dimensions
- Fork outer width
- Models
- Pallet types
- Manual mode
- Weight
- Fork length
- Mast type
MP2000
- 1585 × 910 × 1870 mm
- 620 mm Standard / 550 mm Narrow Fork
- MPID01-M (Standard), MPID01-N (Narrow Fork)
- Three-runner, perimeter-base, non-standard
- Supported
- TBC
- TBC
- TBC
Specification
- Navigation
- Deployment
- Safety system
- Perception
- Dynamic obstacles
- Static obstacles
- Max. surmountable height / gap
- Safety certification
MP2000
- 3D LiDAR-SLAM, VSLAM
- No reflectors or QR codes
- Omni-Sense: depth cameras, 3D LiDAR, multi-sensor
- 360°
- Intelligent avoidance and stop
- Autonomous rerouting
- 10 mm / 35 mm
- TBC
Specification
- Battery life
- Charging time
- Charging time (low voltage)
- Auto charging
- Battery capacity
- Battery type
- Battery swap
- Operation
MP2000
- 12 h (no load), 6 h (max. load)
- ~2 h (200–240 V AC)
- ~3.2 h (100–120 V AC)
- TBC
- TBC
- TBC
- TBC
- Multi-shift
Specification
- Task dispatch
- Fleet orchestration
- Elevator control
- Automatic doors
- IoT devices
- WMS / MES integration
- Network
- Software updates
MP2000
- PUDU Link, APIs, voice commands, task buttons
- Distributed, works offline
- Optional
- Optional
- Optional integration
- Via APIs
- TBC
- TBC
Specification
- Gradeability
- Thresholds
- Gaps
- Aisle width
- Operating temperature
- Ingress protection
- Floor types
- Mixed traffic
MP2000
- 3° full load / 8° unloaded
- Up to 10 mm
- Up to 35 mm
- From 2 m for 90° pickup
- TBC
- TBC
- TBC
- Supported
Specification
- Narrow Fork version
- Task buttons
- Elevator module
- Door integration
- Charging station
- Spare battery
- Pallet sensors
- Spare parts kit
MP2000
- 550 mm fork width
- Supported
- Optional
- Optional
- TBC
- TBC
- Built in
- TBC
Deployment and integration
From site survey to launch, SPARK prepares your robot for your site, your workflow and your team.
01 — Site survey
We assess your requirements and site conditions to help plan your robot deployment.
02 — Mapping
The operating area is mapped for autonomous operation before handover.
03 — Workflow design
We develop a deployment plan around your site and operational requirements.
04 — Integration
Integration requirements are assessed for each deployment, while tasks, schedules and reports are managed through the app.
05 — Training
SPARK provides user training as part of its after-sales support.
06 — Launch
Launch follows completion of site preparation, mapping, workflow setup and training.
Site Assessment
Understand the facility, floor types, traffic patterns and operational requirements.
Robot Deployment
Introduce the robot into daily operations with minimal disruption.
Mapping
Configure operating areas and routes according to the environment.
Remote Monitoring
Monitor robot operations and receive performance information through the app.
Training & Handover
Provide operators with the knowledge needed to manage the robot day to day.
Ongoing Optimization
Adapt maps and update software as the facility evolves.
Training & Handover
Provide operators with the knowledge needed to manage the robot day to day.
Remote Monitoring
Monitor robot operations and receive performance information through the app.
Ongoing Optimization
Adapt maps and update software as the facility evolves.
Site Assessment
Understand the facility, floor types, traffic patterns and operational requirements.
Mapping
Configure operating areas and routes according to the environment.
Robot Deployment
Introduce the robot into daily operations with minimal disruption.
What SPARK adds
We are not a box shifter. Deployment covers site survey, mapping, workflow design, integration planning, training and launch — so your robot arrives configured for your building rather than dropped at your loading bay.
If the survey shows the robot is wrong for your site, we will say so.
upSPARK and ongoing support
From installation and user training to software updates and on-site maintenance, we provide full after-sales support.
Technology That Keeps Improving
Every SPARK robot is managed through its manufacturer app and cloud platform, where operators can schedule tasks, monitor each robot remotely and review performance reports. SPARK supports you from installation and training through to software updates and maintenance.
maintenance tasks
Routine maintenance is kept simple, with clear schedules for brushes, filters, tanks and other consumables. SPARK guides your team through each task so the robot stays ready to work.
scheduling
Tasks and schedules can be set and adjusted through the app or control panel, so the robot works at the times that suit your site, including out of hours.
guided maintenance
SPARK provides step-by-step guidance for maintenance tasks, helping your team keep the robot running reliably with minimal downtime.
expert support
Our UK-based team provides expert after-sales support, including troubleshooting, on-site maintenance and help with optimising your robot routines.
Safety, compliance and governance
Compliance
Certification and conformity
Declaration of Conformity and certification documents for this robot are available on request for technical and procurement review.
Obstacle handling and safety
360° Environmental Awareness
SPARK robots use onboard sensors to detect obstacles, slow down or stop, and reroute where required. Detailed safety behaviour is covered in the product documentation.
Operating boundaries
Mapped operating areas
The robot operates within the mapped areas and configured routes set up during deployment. Operating conditions are listed in the technical specifications above.
Data and privacy
App and cloud management
Tasks, schedules and reports are managed through the manufacturer app and cloud platform. Details of data handling and privacy are shared as part of deployment planning.
Documents for review
Documentation pack
The user manual, specification sheet and conformity documentation can be shared for technical and procurement review.
Choosing between Spark industrial robots
T300
T600
MP2000
Frequently asked questions
Questions about using the MP2000 at your site
What is the MP2000?
An AI-native autonomous forklift from Pudu for pallet handling in warehouses, factories and distribution centres.
How much can the MP2000 lift?
Up to 2,000 kg, with a maximum lift height of 200 mm and fork insertion in about 20 seconds.
Does the MP2000 need reflectors or QR codes?
No. It maps the site itself with 3D LiDAR-SLAM and VSLAM, so deployment needs no site modifications.
Which pallets can it handle?
Standard three-runner and perimeter-base pallets, and it learns to recognise non-standard load carriers.
How narrow can aisles be?
It handles 90° pallet pickup in aisles as narrow as 2 m, with pallet spacing down to 15 cm.
Can it be driven manually?
Yes. MP2000 switches seamlessly between autonomous and manual modes.
How do I request engineering support if there is a problem?
Contact the SPARK support team. We provide after-sales support including troubleshooting, software updates and on-site maintenance for your MP2000.