CLEANING SOLUTIONS

SH1

Smart Upright Scrubber Dryer

Speed up everyday scrubbing with the SH1

The SH1 is a smart upright scrubber dryer engineered for high-performance floor cleaning in commercial and public spaces. With powerful scrubbing, instant drying and intelligent water-saving technology, it delivers spotless results while reducing cleaning time and chemical usage, all in a compact, user-friendly design.

Best for

Fast operator-led scrubbing

Primary task

Scrubbing and instant drying

Environment

Hotels, restaurants, offices, retail, healthcare and other public spaces

Deployment type

Operator-driven machine, with SPARK training and ongoing support

Get floors clean and dry faster than with mops and buckets

Manual mopping is slow, uses a lot of water and chemicals, and leaves wet floors that spread dirt and slow people down.

Tough dirt and grease resist manual mopping

Mops spread dirt around instead of lifting stains, grease and spills from the floor.

High-efficiency scrubbing.

The SH1 delivers 27 kg brush pressure, 350 RPM scrubbing and 20,000 Pa suction to remove tough dirt, stains and grease.

Wet floors slow people down and spread dirt

Floors left wet after mopping need time to dry and can cause secondary contamination.

Instant scrub-and-dry

A powerful brushless motor delivers 20,000 Pa suction to dry floors instantly, preventing secondary contamination.

Corners, edges and low spaces get missed

Under furniture, along skirting and in tight corners, traditional machines cannot reach.

Multidimensional cleaning

Horizontal, vertical, edge and 360° surround cleaning combine in one system, with smooth access under furniture and low-clearance areas.

Wastewater disposal blocks pipes

Solids in dirty water clog drains and make emptying the machine a messy job.

Air-liquid-debris separation

An advanced filtration system separates solids from liquids, and the optional filter box prevents pipe blockages.

Key outcomes

Professional cleaning performance

Remove stains, grease and grime in one pass. The SH1 scrubs and dries instantly for a spotless, hygienic finish.

27 kg brush pressure · 350 RPM scrubbing · 20,000 Pa suction · 440 mm working width · 490 mm squeegee.

Cuts cleaning time by around 70% compared with traditional methods.

Eight Cleaning
Modes

Match the clean to the task. The SH1 switches between modes for daily, heavy and delicate cleaning.

Brush Max · Eco · Normal · Water Suction · Heavy Duty · Low Residue · Soak · ECO accessory.

Gives operators the right setting for every floor and level of soiling.

Smart App Reporting

See how each clean performed. The SH1 app reports cleaning duration, water usage and area cleaned after every session.

Post-cleaning reports · real-time battery level · tank status · component diagnostics and alerts.

Helps supervisors track usage and plan maintenance before problems occur.

Easy maintenance, less downtime

Keep the machine ready with minimal effort. Quick-release parts make daily care fast and simple.

Quick-release brushes, squeegee, tanks and battery · 4.2-inch touchscreen · roller-dial · foot-pedal start.

Reduces training time and keeps the SH1 in service.

What powers the SH1's fast scrub-and-dry cleaning

High-efficiency scrubbing

Delivers 27 kg brush pressure, 350 RPM scrubbing power and 20,000 Pa suction to remove tough dirt, stains and grease with professional-grade performance.

Instant drying

A powerful brushless motor and rubber squeegee dry floors instantly, preventing secondary contamination and leaving a hygienic finish.

Water and chemical savings

Uses up to 80% less water and detergent than manual mops, helping reduce running costs and environmental impact.

Multidimensional cleaning

Combines horizontal, vertical and edge cleaning in one system, with dead-zone access under furniture and in low-clearance areas.

Smart monitoring

Real-time diagnostics monitor tank levels, brush and vacuum motors and notify users proactively.

Award-winning design

The SH1 received the iF Design Award 2025, praised for its performance, usability and clean aesthetic.

How it works

01.

Prepare the machine

Fill the 4 L solution tank, choose a cleaning mode on the 4.2-inch touchscreen and start with the foot pedal.

What the SH1 handles
Shows battery level, tank status and the selected mode in real time.

Where people step in
An operator prepares and starts the SH1. SPARK provides user training as part of after-sales support.

02.

Scrub and dry

Guide the SH1 across the floor. It scrubs, recovers dirty water and dries in a single pass, including along edges and under furniture.

What the SH1 handles
Scrubs with 27 kg brush pressure and dries instantly with 20,000 Pa suction.

Where people step in
The operator steers the machine and switches modes for heavier or delicate areas.

03.

Review and maintain

Check the post-cleaning report in the app for duration, water usage and area cleaned, then empty and rinse the tanks.

What the SH1 handles
Generates cleaning reports and alerts users to maintenance needs.

Where people step in
People review reports and carry out quick-release maintenance of brushes, squeegee, tanks and battery.

Use cases and environments

Hotels & Spas

Fast scrubbing of lobbies, corridors and spa areas. At Japan’s Ryugujo Spa Hotel it cut staff time by 80%.

Restaurants & Cafés

Removes grease and food spills from dining and kitchen floors, drying instantly.

Bars & Venues

Quick turnaround cleaning between services and events.

Serviced Apartments

Daily scrubbing of entrances, hallways and amenity spaces.

Offices & Workplaces

Cleaning of receptions, kitchens and washrooms with low noise and fast drying.

Retail Stores

Spot and daily scrubbing of shop floors, reaching under displays.

Showrooms

Streak-free finish on polished floors.

Gyms & Leisure

Hygienic scrub-and-dry cleaning for changing rooms and studios.

Healthcare & Clinics

Hygienic cleaning that prevents secondary contamination.

Schools & Universities

Fast cleaning of corridors, canteens and washrooms.

Transport Hubs

Quick response to spills in stations and terminals.

Government Facilities

Routine floor care for public buildings.

Light Manufacturing

Scrubbing of production and assembly floors.

Warehouse Offices

Cleaning of offices, welfare areas and canteens within logistics sites.

Food Production

Grease and spill removal with instant drying.

Workshops

Spot cleaning around equipment and workbenches.

Product in action

SH1 high-efficiency scrubbing

SH1 air-liquid-debris separation

SH1 cleaning under furniture

Technical specifications

Specification

SH1

Specification

SH1

Specification

SH1

Specification

SH1

Specification

SH1

Specification

SH1

Specification

SH1

Deployment and integration

From site survey to launch, SPARK prepares your robot for your site, your workflow and your team.

What SPARK adds

We are not a box shifter. Deployment covers site survey, mapping, workflow design, integration planning, training and launch — so your robot arrives configured for your building rather than dropped at your loading bay.

If the survey shows the robot is wrong for your site, we will say so.

upSPARK and ongoing support

From installation and user training to software updates and on-site maintenance, we provide full after-sales support.

Safety, compliance and governance

Safety, compliance and operating information for technical and procurement review.

Compliance

Certification and conformity

Declaration of Conformity and certification documents for this robot are available on request for technical and procurement review.