- Best for retail, offices, hotels and public buildings
- Detects and removes multiple waste types with 99% accuracy
- Edge cleaning within 5 cm on hard floors and carpets
Automate spot cleaning with the SP50
The CenoBots SP50 is a spot-cleaning robot that detects multiple types of waste and debris with a high level of accuracy. Powered by an NVIDIA Xavier AI chip and 32-beam 3D LiDAR, it patrols large areas, cleans only where it is needed and adapts its suction to the debris it finds.
Best for
AI spot cleaning of large areas
Primary task
Sweeping and vacuuming detected waste
Environment
Retail, offices, hotels, healthcare and public buildings
Deployment type
Mapped autonomous deployment, with SPARK site assessment, training and ongoing support
Keep large floors litter-free without cleaning every square metre
Most floors are mostly clean most of the time; the work is finding and removing the waste that appears.
Full-coverage cleaning wastes time on clean floor
Robots and staff spend hours covering areas that are already clean.
Spotless cleaning precision.
Intelligent auto-spot detection and smart waste recognition target only the areas that need cleaning.
Waste comes in many shapes and sizes
Different debris needs different suction, and fixed power wastes energy.
Smart sensing & suction adaptation
AI-powered recognition adjusts suction on the fly, up to 25 kPa, to match the debris type.
Busy spaces make autonomous cleaning risky
People, glass and protrusions are hard for simple sensors to detect.
Highly safe navigation
3D LiDAR and multi-sensor technology detect obstacles up to 150 m with 99% accuracy, including glass and protrusions.
Edges and corners collect litter
Dirt builds up along walls where many machines leave a gap.
Edge-to-edge cleaning
The SP50 cleans within 5 cm of walls so no corner is missed.
Key outcomes
Precision spot cleaning
Remove waste where it appears. The SP50 detects and removes multiple types of dirt with 99% accuracy.
AI waste recognition · 720 mm sweeping width · 460 mm roller brush · up to 25 kPa suction · <5 cm edge cleaning.
Data-driven cleaning brings greater efficiency and lower operational costs.
Highly
Intelligent
Process complex data in real time. An NVIDIA Xavier AI chip powers precise mapping and smart navigation.
NVIDIA Xavier AI chip · 10-billion-parameter big models · 32-beam 3D LiDAR · automatic map updating.
Detects obstacles including glass and protrusions for safe operation in busy spaces.
Companion App
Manage cleaning remotely. Plan routes, monitor the robot in real time and receive alerts when tasks are complete.
Route planning · real-time location · task-complete alerts · remote management.
Frees staff to focus on higher-value tasks.
Self charging
Keep cleaning with minimal intervention. The SP50 returns to its dock and resumes where it stopped.
Auto-docking · resume from breakpoint · lift navigation on certain models · hard floors and carpets.
Extends coverage across large and multi-floor sites.
What powers the SP50's intelligent spot cleaning
Spotless precision
Highly safe
Highly intelligent
Suction adaptation
Automatic map updating
Self charging
How it works
01.
Map or configure
Prepare the SP50 for the site. The environment is mapped and patrol routes and schedules are planned in the companion app.
What the SP50 handles
Uses its 32-beam 3D LiDAR and AI chip for precise mapping, with automatic map updates.
Where people step in
Initial mapping and configuration require human input.
The exact SPARK deployment process TBC
02.
Run the workflow
Let the SP50 patrol autonomously, detecting waste, adapting suction and cleaning spots as it finds them.
What the SP50 handles
Carries out waste detection, spot cleaning, obstacle avoidance and self charging.
Where people step in
People empty the bins and step in for situations outside the configured workflow. Exact exception and takeover procedures TBC
03.
Monitor and improve
Keep cleaning aligned with your site using the companion app to monitor location and receive task alerts.
What the SP50 handles
Reports location and task completion in real time.
Where people step in
People remain responsible for reviewing performance and deciding when adjustments, maintenance or further configuration are needed. TBC
Use cases and environments
Product in action
Technical specifications
Specification
- Productivity – spot cleaning (patrol)
- Productivity – regular cleaning
- Sweeping width
- Roller brush length
- Max. suction
- Edge cleaning distance
- Max. speed
- Noise
SP50
- 15,550 m²/h | 167,379 ft²/h
- ~1,987 m²/h (distributor data)
- 720 mm | 28.3 in
- 460 mm | 18.1 in
- 25 kPa
- < 5 cm
- 1.2 m/s
- 58 dB (distributor data)
Specification
- Length
- Width
- Height
- Net weight
- Trash tray capacity
- Dust and waste bins
- Min. passable width
- Body colour
SP50
- 855 mm | 33.7 in
- 600 mm | 23.6 in
- 1050 mm | 41.3 in
- 132 kg (distributor data)
- 5 L | 1.3 gal
- 6.6 L dust / 2 L waste
- TBC
- Silver / black
Specification
- AI processor
- LiDAR
- Obstacle detection
- Special obstacles
- AI models
- Map updating
- Waste recognition
- Safety certification
SP50
- NVIDIA Xavier AI edge chip
- Multi-channel 3D LiDAR (32 beams)
- Up to 150 m, 99% accuracy
- Glass and protrusions
- 10-billion-parameter big models
- Automatic
- Multiple types, 99% accuracy
- TBC
Specification
- Battery
- Charging time
- Runtime – regular
- Runtime – spot cleaning
- Self charging
- Battery type
- Rated voltage
- Charging station
SP50
- 120 Ah (distributor data)
- 4 h (distributor data)
- 8 h (distributor data)
- 13 h (distributor data)
- Returns to dock and resumes
- TBC
- TBC
- Included
Specification
- App
- Route planning
- Real-time location
- Alerts
- Lift navigation
- Network
- Software updates
- Fleet view
SP50
- SP50 companion app
- Supported
- Supported
- Task-complete alerts
- Certain models
- TBC
- TBC
- TBC
Specification
- Floor types
- Environment
- Edge clearance
- Ingress protection
- Operating temperature
- Max. slope
- Max. threshold height
- Multi-floor
SP50
- Hard floors and carpets
- Indoor commercial and public spaces
- 5 cm along walls
- TBC
- TBC
- TBC
- TBC
- Lift navigation on certain models
Specification
- Charging dock
- Companion app
- Roller brush
- Side brushes
- Filters
- Spare bins
- Lift module
- Spare parts kit
SP50
- Included
- Included
- 460 mm
- TBC
- TBC
- TBC
- TBC
- TBC
Deployment and integration
From site survey to launch, SPARK prepares your robot for your site, your workflow and your team.
01 — Site survey
We assess your requirements and site conditions to help plan your robot deployment.
02 — Mapping
The operating area is mapped for autonomous operation before handover.
03 — Workflow design
We develop a deployment plan around your site and operational requirements.
04 — Integration
Integration requirements are assessed for each deployment, while tasks, schedules and reports are managed through the app.
05 — Training
SPARK provides user training as part of its after-sales support.
06 — Launch
Launch follows completion of site preparation, mapping, workflow setup and training.
Site Assessment
Understand the facility, floor types, traffic patterns and operational requirements.
Robot Deployment
Introduce the robot into daily operations with minimal disruption.
Mapping
Configure operating areas and routes according to the environment.
Remote Monitoring
Monitor robot operations and receive performance information through the app.
Training & Handover
Provide operators with the knowledge needed to manage the robot day to day.
Ongoing Optimization
Adapt maps and update software as the facility evolves.
Training & Handover
Provide operators with the knowledge needed to manage the robot day to day.
Remote Monitoring
Monitor robot operations and receive performance information through the app.
Ongoing Optimization
Adapt maps and update software as the facility evolves.
Site Assessment
Understand the facility, floor types, traffic patterns and operational requirements.
Mapping
Configure operating areas and routes according to the environment.
Robot Deployment
Introduce the robot into daily operations with minimal disruption.
What SPARK adds
We are not a box shifter. Deployment covers site survey, mapping, workflow design, integration planning, training and launch — so your robot arrives configured for your building rather than dropped at your loading bay.
If the survey shows the robot is wrong for your site, we will say so.
upSPARK and ongoing support
From installation and user training to software updates and on-site maintenance, we provide full after-sales support.
Technology That Keeps Improving
Every SPARK robot is managed through its manufacturer app and cloud platform, where operators can schedule tasks, monitor each robot remotely and review performance reports. SPARK supports you from installation and training through to software updates and maintenance.
maintenance tasks
Routine maintenance is kept simple, with clear schedules for brushes, filters, tanks and other consumables. SPARK guides your team through each task so the robot stays ready to work.
scheduling
Tasks and schedules can be set and adjusted through the app or control panel, so the robot works at the times that suit your site, including out of hours.
guided maintenance
SPARK provides step-by-step guidance for maintenance tasks, helping your team keep the robot running reliably with minimal downtime.
expert support
Our UK-based team provides expert after-sales support, including troubleshooting, on-site maintenance and help with optimising your robot routines.
Safety, compliance and governance
Compliance
Certification and conformity
Declaration of Conformity and certification documents for this robot are available on request for technical and procurement review.
Obstacle handling and safety
360° Environmental Awareness
SPARK robots use onboard sensors to detect obstacles, slow down or stop, and reroute where required. Detailed safety behaviour is covered in the product documentation.
Operating boundaries
Mapped operating areas
The robot operates within the mapped areas and configured routes set up during deployment. Operating conditions are listed in the technical specifications above.
Data and privacy
App and cloud management
Tasks, schedules and reports are managed through the manufacturer app and cloud platform. Details of data handling and privacy are shared as part of deployment planning.
Documents for review
Documentation pack
The user manual, specification sheet and conformity documentation can be shared for technical and procurement review.
Choosing between Spark cleaning robots
Beetle
S5
SP50
Frequently asked questions
Questions about using the SP50 at your site
What is a spot-cleaning robot?
Instead of cleaning every square metre, the SP50 patrols the floor, detects waste with AI and cleans only where it is needed.
What type of facilities can the SP50 clean?
The SP50 suits retail, offices, hotels, healthcare, transport hubs and other indoor commercial and public spaces.
How accurate is the waste detection?
The SP50 detects and removes multiple types of dirt with 99% accuracy, even along walls with just 5 cm clearance.
How does the SP50 navigate safely?
An NVIDIA Xavier AI chip and 32-beam 3D LiDAR detect obstacles up to 150 m with 99% accuracy, including glass and protrusions.
Can the SP50 clean carpets?
Yes. It delivers powerful cleaning on hard floors and carpets, adapting suction up to 25 kPa to the debris.
Does the SP50 charge itself?
Yes. It returns to its charging dock automatically and resumes cleaning from where it stopped; certain models can navigate lifts.
How do I request engineering support if there is a problem?
Contact the SPARK support team. We provide after-sales support including troubleshooting, software updates and on-site maintenance for your SP50.